Tauberbischofsheim · Worldwide export DE EN

Model

Weinig Hydromat 17BL

Years: ~ 1990

WEINIG Hydromat 17BL – High-performance planer and moulder

The Weinig Hydromat 17BL is an industrial planing and profiling machine for batch production in solid wood. It processes boards, mouldings and profiled timber in a throughfeed operation. Working width is 170 mm and working height is 120 mm, both specified at a cutting circle diameter of 163 mm. Spindle arrangement, motor ratings and feed drive are configured for the production task.

The suffix L stands for the German word “Lang” (long). The Hydromat 17BL is the long version of the Hydromat 17B and shares the basic machining specifications listed here.

Machining and Machine Configuration

A cast-iron frame forms the machine base. Hardened, chrome-plated feed rollers, driven bed rollers and pneumatic roller pressure support workpiece transport. Power is transmitted through universal joints and oil-bath intermediate gearboxes. Mechanical digital indicators assist dimensional setup.

The Hydromat 17BL has no outboard bearings on its horizontal spindles. Its 170 mm working width, compared with 220 mm on the Hydromat 22BL, suits narrower workpieces.

Technical data for the standard version

Technical data for the standard version
ManufacturerMichael Weinig AG
ModelHydromat 17BL
Machine typePlaner and moulder
Working width170 mm at a cutting circle diameter of 163 mm
Working height120 mm at a cutting circle diameter of 163 mm
Spindle speed6,000 rpm
Spindle diameter50 mm
Cutting circle diameter120–250 mm
Motor rating per spindle7.5 kW in the documented standard specification
Horizontal spindlesWithout outboard bearings
Feed roller diameters140 and 170 mm
Feed roller width1 × 50 mm
Driven bed roller diameter110 mm
Surfacing table and fence adjustment range10 mm
Vertical spindle adjustment below table40 mm
Horizontal spindle axial adjustment30 mm
Surfacing table length2 m
Feed adjustmentcontinuously variable

Spindle count and arrangement depend on the configuration. There is no single feed speed or total connected load applicable to every machine of this model.

Special equipment and model variants

Feed drives
Mechanical versions cover 6–36, 8–40 or 6–60 m/min; hydraulic versions cover 6–60, 8–80, 12–120 or 15–150 m/min. The available range depends on the installed feed system.
Motor ratings
Mechanical feed drives are listed at 5.5, 7.5 or 11 kW; hydraulic drives at 15, 18.5, 30 or 37 kW. Special equipment includes spindle motors up to 45 kW and feed motors up to 55 kW.
Jointing system
Straight and profile jointers with stones for HSS, Stellite and carbide knives bring the cutting edges of a cutterhead onto a common cutting circle. Jointer cassettes support preparation in the grinding room.
Workpiece guidance
A mobile spindle for varying workpiece widths, groove guidance, reduced roller spacing for short pieces, and special outfeed guides, pressure elements and feed rollers.
Sawing
Special table plates, anti-kickback devices and a swivelling feed system complement machines configured for ripping.
Setup and control
ATS, CNC-5 or CNC-24 systems and O.M.A./C.M.A. tool measuring stands are described as additional systems. A universal spindle is available as a spindle arrangement variant.
Further extras
Miniphon noise enclosure, spindle brakes, manual or automatic Waxilit pump, Service-Control and mechanised feeding and stacking systems.

Application and classification

The Hydromat 17BL is designed for recurring planing and profiling tasks at high throughput. Assessment of an individual machine should consider its spindle arrangement, feed drive, tooling and setup systems. No separate overall length is documented for the long version, so no general machine length is specified here.

Source & documentation

Michael Weinig AG, “Hydromat 22 B / Hydromat 17 B – Qualität steigern. Ausstoß vergrößern. Flexibler werden.”, German manufacturer brochure, particularly printed pages 4–13 and 16–21; no clearly stated publication year. Archive file: qualitat-steigern-aussto-vergroern-flexibler-werden.pdf. The technical basis is the brochure for the B versions. Identification of the long version and the meaning of “L = Lang” were supplied as editorial information by Ochmann Maschinen.

Note: This text was created and checked with the assistance of AI. Despite careful checking, errors may remain.

Brochures for this model

Current and archived Hydromat 17BL machines from Weinig.

Choose each optional service separately. You can change or withdraw your choice at any time using Cookie settings in the footer. Your choice is stored for 180 days.

Providers, purposes and storage periods