+49 (0)9341 1776 info@ochmann-maschinen.de
Tauberbischofsheim · Worldwide export DE EN
OCHMANNWoodworking machinery

Model

Mafell HIT-M

Years: ~ 2019

MAFELL HIT-M – Portable zero-joint edgebander

The MAFELL HIT-M is a portable zero-joint edgebander for panel edges in furniture and interior joinery production. Its hot-air injection technology activates the functional layer of suitable zero-joint edging. This creates a visually seamless joint without applying additional adhesive at the machine. Straight edges, curves, free-form components and bevelled panel edges can be processed depending on the version and equipment.

Machining and Machine Configuration

The HIT-M features automatic edging intake with edge detection and continuously adjustable feed. Temperature and feed speed are set on the control panel. The support plate tilts up to 50° for bevelled edges. Edging height and thickness must be matched to the workpiece and functional layer.

For portable operation, the device is guided along the workpiece. An additional BAT processing table enables semi-stationary use, with the workpiece guided to the device on repositionable ball transfer units.

Technical data for the standard version

Technical data for the standard version
ManufacturerMAFELL
Model rangeHIT-M
Machine typePortable zero-joint edgebander
Rated voltage230 V
Rated input3,050 W
Edging thickness0.4–3.0 mm
Feed speed1–5.5 m/min, continuously adjustable
Support plate tilt range0–50°
Maximum temperature520 °C
Heat-up time30 seconds
Compressed air connection6–10 bar

These shared specifications apply to the three documented versions. Edging height, minimum internal radius, dimensions and weight depend on the version.

Special equipment and model variants

HIT-M 65
Edging height 10–65 mm, minimum internal radius 22 mm, weight 10.8 kg and dimensions 220 × 160 × 360 mm (L × W × H).
HIT-M 65 SA
Edging height 10–65 mm. Its pivoting, powered pressure roller enables internal radii from 10 mm. Weight 10.8 kg and dimensions 220 × 160 × 360 mm (L × W × H).
HIT-M 103
Edging height 10–103 mm, minimum internal radius 22 mm, weight 10.9 kg and dimensions 220 × 160 × 400 mm (L × W × H).
Processing table and accessories
The BAT converts the device into a semi-stationary workstation with angle adjustment up to 55°. Documented accessories include a foot switch, hold-down device, edging strip magazine holder and table widening extension. The autumn 2019 offer combines the HIT-M 65 with the BAT-V vacuum processing table and a hold-down device.

Application and classification

The HIT-M complements edgebanding operations requiring a portable device or semi-stationary workstation. Applications include free-form components and bevelled edges. The technical variant table assigns the minimum internal radius of 10 mm specifically to the HIT-M 65 SA; it specifies 22 mm for the HIT-M 65 and HIT-M 103.

Source & documentation

MAFELL AG, “Nullfugenbekanter HIT-M”, German edition 09/19, particularly printed pages 2–11; supplemented by “Herbstangebote”, valid 1 September–31 December 2019. Both documents are included in the archive scan mafell-hit-m.pdf. Specifications reflect the 2019 documentation.

Note: This text was created and checked with the assistance of AI. Despite careful checking, errors may remain.

Brochures for this model

Current and archived HIT-M machines from Mafell.

Nullfugenbekanter Mafell Typ HIT-M mit Bearbeitungstisch BAT-V Ref. 1700023 Edge processingMafell Type HIT-M zero-joint moulding machine with BAT-V machining table

Choose each optional service separately. You can change or withdraw your choice at any time using Cookie settings in the footer. Your choice is stored for 180 days.

Providers, purposes and storage periods