New
Nicht vorrätig
Four-sided planer
On request
| Suction | 18,500 m^3/h |
| Working width | 230 mm |
| Working height | 160 mm |
| Operating hours | 2.900 h |
| More information on the product page | |
New
Nicht vorrätig
Chop saw
On request
| Input stack max. | 6,100 x 1,200 x 1,200 mm // 5 tonnes |
| Max. Wood input length | 6,3 m |
| Return stroke slider | max. 180 m/min |
| Saw blade diameter | 500 mm |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Bridge | 25,000 mm |
| Travelling distance (drag chain) | 75,000 mm |
| Further technical data | See PDF |
| Joulin vacuum lifting device for KVH beams up to 13 m incl. control unit and 25 m bridge. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Deck boards | max. 5 |
| Largest range | 1,100 x 2,000 mm |
| Smallest pallet | 600 x 800 mm |
| Performance | approx. 150 EPAL per hour with 3 persons |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Performance | 15t/h |
| Engine | 2 x 90 Kw per press |
| Sieve | 6 mm |
| Two Münch RMP 660 pellet mills incl. pipes and screws as well as some new parts. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Entrance width | max. 290 mm |
| Input length | max. 3,300 mm |
| Optimisation cross-cut saw Dimter type OptiCut 150 for full optimisation with chalk line detection and infeed and outfeed. | |
| Special price ex location. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Stack width | max. 1,200 mm |
| Stacking height | max. 1,750 mm |
| Stack length | max. approx. 3,000 mm |
| Workpiece | max. approx. 250 x 100 mm |
| More information on the product page | |
New
Nicht vorrätig
Four-sided planer
On request
| Working width | 230 mm |
| Working height | approx. 180 mm |
| Spindle | 5 |
| Spindle 1 | Bottom / 11 kW / 50 mm |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Heat output | 260 kW |
| Contents | 86.6 m^3 gross |
| Water quantity | 10 m^3/h |
| Water temperature | 90 °C |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Table size | approx. 2,300 x 900 mm |
| Feed rate | up to 25 m/min |
| Workpiece width | 20 to 230 mm |
| Workpiece length | 650 to 3,000 mm |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Feed rate | for max. 22 m/min |
| Workpiece width | 30 - 230 mm |
| Workpiece length | 250 - 3,500 mm |
| Outfeed automation, Weinig type RF15 return conveyor system for automatic buffering and continuous return transport of the workpiece to the operator. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Clamping length | 510 mm |
| Table size | 1250 x 410 mm |
| Further technical data | See PDF |
| Profile milling machine Bäuerle PM 510 for milling large and complicated profiles of all kinds for furniture, pergolas, columns, decorative panels, stairs and balcony railings. | |
| More information on the product page | |
New
Nicht vorrätig
Thickness planer
On request
| Working width | 630 mm |
| Working height | 250 mm |
| Speed | 5,000 rpm |
| Knife system | Tersa Z4 |
| More information on the product page | |
New
Nicht vorrätig
Fine and hydro planing machine
On request
| Working width | 230 mm |
| Working height | 120 mm |
| Counter bearing | Yes |
| Jointer | Yes |
| More information on the product page | |
New
Nicht vorrätig
Four-sided planer
On request
| Working width | 180 mm |
| Working height | 120 mm |
| Spindle | 4 |
| Spindle 1 | Below |
| More information on the product page | |
New
Nicht vorrätig
Double-end profiler
On request
| Working width | 2,100 mm |
| Diffuser height | max. 100 mm |
| Feed rate | 4 - 20 m/min |
| Schwabedissen DAa 79 double-end tenoner for simultaneous end-face machining of workpieces. | |
| More information on the product page | |
New
Nicht vorrätig
Tool grinding machine
On request
| Included | Accessories |
| Tool holder | 40 + 50 mm |
| Tool width | max. 230 mm |
| Tool flight circle | max. 300 mm |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Cutting height | max. approx.: 100 mm |
| Heavy-duty Raimann type K1 single-blade edging saw for edging or ripping boards lengthwise with one saw blade. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Technical data | on request |
| Dowel drilling and driving machine KOCH B-51-NC for automatic drilling, gluing and dowelling of wood. | |
| Special price for self-dismantling from site. | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Cutting width | max. approx. 5,000 mm |
| Long double mitre saw Rapid for simultaneous sawing of two ends of a workpiece made of wood or aluminium, e.g. in window construction. | |
| Special price from location | |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Work surface | 700 + 1,000 + 800 x 1,300 mm |
| Heating | Electric |
| Ott veneer press with three separately controllable pressing plates for veneering wood or other pressing tasks | |
| Special price | ex site incl. dismantling and loading |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Press size | approx. 3.5 x 3.5 m |
| Further technical data | on request |
| MAWEG JUMBO hydraulic frame press with electric adjustment and integrated drilling units. | |
| Special price from location | |
| More information on the product page | |
New
Nicht vorrätig
CNC machining centre
On request
| CNC machining centre Eima for processing wood. | |
| Special price for self-dismantling. | |
| Technical data | On request |
| More information on the product page | |
New
Nicht vorrätig
Not assigned
On request
| Technical data | on request |
| Hemag automatic rebating machine for rebating and synchronised routing of doors and windows. | |
| Special price ex location. | |
| More information on the product page | |