Neu
Grinding machine
490,00 €
| Engine | 2.2 kW |
| Spindle diameter | 35 mm |
| Spindle length per side | 175 mm |
| Carstens double sanding block for sanding and polishing wood and other materials with two spindles. | |
| More information on the product page | |
Neu
Grinding machine
590,00 €
| Clamping length per side approx. | 450 mm |
| - Spindle diameter | 45/35 mm |
| Long-legged double sanding block with left/right barrel for woodworking. | |
| More information on the product page | |
Neu
Profile sanding machine
1.900,00 €
| Motors each approx. | 2 kW |
| Loeser S0 profile sanding machine for sanding profiles using templates. | |
| The sanding belt is guided over the profile wheel/template and thus transfers the mould to the wood which is manually guided through the machine. | |
| - Workpiece size LxWxH max. approx. | 500 x 300 x 100 mm |
| More information on the product page | |
Neu
Double cross-cut saw
1.900,00 €
| Working width | 1,700 mm |
| Saw blade Ø | 350 mm |
| Cutting length | 1,200 mm |
| Double cross-cut saw Hüllhorst type DH for cutting timber and boards to length on both sides with dimensional accuracy. The machine enables efficient working thanks to two opposing sawing units and precise length positioning. | |
| More information on the product page | |
Neu
Circular saw
6.900,00 €
| Saw blade diameter | max. 400 mm |
| Cutting length | max. 3,200 mm |
| Swivelling | 45° |
| Scoring machine | Yes |
| More information on the product page | |
Neu
Optimising cross-cut saw
19.900,00 €
| Input length | max. 5,500 mm |
| Saw blade ø | max. 700 mm |
| Cutting width | max. 700 mm |
| Cutting height | max. 120 mm |
| More information on the product page | |
Neu
Under table saw
1.590,00 €
| Cutting height | 85/40 mm |
| Cutting length | max. 380 mm |
| Graule AGT combined pull saw and circular table saw. The pull saw can be tilted and swivelled. | |
| The machine can also only be used as a pull saw by dismantling the table. | |
| More information on the product page | |
Neu
Double crosscut saw
4.900,00 €
| Mitre angle | 45° - 90° |
| Cutting length | approx. 2,200 mm |
| Further data | See PDF |
| Workpiece | max 50x70 mm |
| More information on the product page | |
Neu
Pendulum saw
2.900,00 €
| Roller table | 250+360 cm |
| Cutting width | max. approx. 600 mm |
| Cutting height | max. approx. 120 mm |
| Feed rate | Pneumatic |
| More information on the product page | |
Neu
Double cross-cut saw
4.500,00 €
| Belt length | approx. 1,700 mm + 2,700 mm |
| Cutting width | max. 2,500 mm |
| Cutting height | max. approx. 80 mm |
| Double cross-cut saw Rema type DMGB-35 incl. outfeed conveyor belt for cutting timber to length on two sides. This machine was specially used for sawing doors to size. | |
| More information on the product page | |
Neu
Cut-to-length and mitre saw
390,00 €
| Engine | 0.55 kW / 220 V |
| Cutting height | approx. 50 mm |
| Cutting depth | approx. 80 mm |
| The EMMEGI (400176) wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts. | swivelling. |
| More information on the product page | |
Neu
Rocking saw
250,00 €
| Connection | 16 A / 400 V |
| Width | 600 mm |
| Length | 950 mm |
| Engine | 2.2 kW |
| More information on the product page | |
Neu
Rocking saw
250,00 €
| Connection | 220 V |
| Width | 600 mm |
| Length | 950 mm |
| Engine | 1.5 kW |
| More information on the product page | |
Neu
Combined circular sawing and milling machine
900,00 €
| Engine | 3 kW |
| Three compartment combined circular table saw, long hole drilling and milling machine Kirchner Leipzig. | |
| Without milling arbour. | |
| More information on the product page | |
Neu
Dowel hole drilling machine
1.900,00 €
| Drill spindles | 21 |
| Diffuser width | max. 1,000 mm |
| Swivelling | Pneumatic |
| Division | 32 mm |
| More information on the product page | |
Neu
Knothole drilling machine
190,00 €
| Knothole drilling machine Ayen type D4-105 for drilling out knotholes in wood as a wall model. | |
| More information on the product page |
Neu
Dowel drilling machine
3.900,00 €
| Drill spindles | 2 x 25 |
| Spindle distance | max. 768 mm |
| Division | 32 mm |
| Electro-pneumatic universal dowel hole drilling machine Scheer type DB4 for precise drilling of dowel holes in wood-based materials. The machine enables efficient and precise work thanks to several synchronised horizontal and vertical drilling spindles. Ideal for furniture and interior construction as well as for series production in woodworking. | |
| More information on the product page | |