New
Combination planer
On request
| Working width | 230 mm |
| Working height | 120 mm |
| Spindle 1 | Bottom (5.5 kW) |
| Spindle 2 | Top (5.5 kW) |
| More information on the product page | |
New
Optimising cross-cut saw
On request
| Input length | max. 5,500 mm |
| Saw blade ø | max. 700 mm |
| Cutting width | max. 700 mm |
| Cutting height | max. 120 mm |
| More information on the product page | |
New
Four-sided planer
On request
| Working width | 230 mm |
| Working height | 160 mm |
| Spindle 1 | Bottom / 7.5 kW |
| Spindle 2 | Right / 7.5 kW |
| More information on the product page | |
New
Four-sided planer
On request
| Anzahl der Spindeln 5 St. | |
| Dressing table length | 2,000 mm |
| Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed wood or other angled (dressed) workpieces such as MDF or plastic parts. | |
| The dressing spindle can be retrofitted if required. | |
| More information on the product page | |
New
Grinding machine
On request
| Aggregate 1 | Electronic pressure bar |
| Aggregate 2 | Cross section |
| Aggregate 3 | Longitudinal grinding |
| Aggregate 4 | Cleaning brush |
| More information on the product page | |
New
Not assigned
On request
| Width | 2,200 mm |
| Filling quantity | max. 13,000 litres |
| Height | 3,250 mm |
| Length | 6,000 mm |
| More information on the product page | |
New
Planer knife sharpening machine
On request
| Pick-up mandrel | 30 / 35 / 40 / 50 / 60 mm |
| Max. tool width | approx. 230 mm |
| Grinding speed | Infinitely adjustable |
| Manual planing knife sharpening machine Weinig Rondamat 931 for sharpening and sharpening profile knives and straight planing knives in the planing head using templates. | |
| More information on the product page | |
New
Cross profile milling machine
On request
| Working width | approx. 1,000 mm |
| Spindle Ø | 40 mm |
| Feed rate | Pneumatic |
| Comec type FRO1000 cross profile router for precise processing of cross profiles and mouldings on solid wood and wood-based materials. The robust design and stable routing unit enable consistently precise profiles for series and individual production. | |
| More information on the product page | |
New
Grinder
On request
| Largest tool diameter | 300 mm |
| Smallest tool diameter | 80 mm |
| Max. grinding disc diameter. | 225 mm |
| Tool width max. | 230 mm |
| More information on the product page | |
New
Combination planer
On request
| Working width | 230 mm |
| Working height | 120 mm |
| Counter bearing | Yes |
| Jointer | Yes |
| More information on the product page | |
New
Circular saw
On request
| Saw blade diameter | max. 400 mm |
| Cutting length | max. 3,200 mm |
| Swivelling | 45° |
| Scoring machine | Yes |
| More information on the product page | |
New
Automatic rebating machine
On request
| WEINIG UNIVAR 10 automatic rebate unit from a UC-Matic window system, without function. | |
| - Year of construction | 1997 |
| - Sütron BT20 control unit | |
| - Machine incomplete | |
| More information on the product page | |
New
Double crosscut saw
On request
| Mitre angle | 45° - 90° |
| Cutting length | approx. 2,200 mm |
| Further data | See PDF |
| Workpiece | max 50x70 mm |
| More information on the product page | |
New
Drying chamber
On request
| Technical data | on request |
| Paint room from Höcker Polytechnik consisting of | |
| - Splash wall approx. 3 x 2.5 m | |
| - Supply air duct | |
| More information on the product page | |
New
Thickness planer
On request
| Weight | approx. 1,150 kg |
| Planing width | 610 |
| Planing height | 200 mm |
| Planing shaft | Strip moulding knife Z4 |
| More information on the product page | |
New
Double cross-cut saw
On request
| Belt length | approx. 1,700 mm + 2,700 mm |
| Cutting width | max. 2,500 mm |
| Cutting height | max. approx. 80 mm |
| Double cross-cut saw Rema type DMGB-35 incl. outfeed conveyor belt for cutting timber to length on two sides. This machine was specially used for sawing doors to size. | |
| More information on the product page | |
New
Table milling machine
On request
| Clamping length | approx. 120 mm |
| Direction of rotation | Left and right |
| Speeds (milling machine) | 3,000/5,000/6,000/10,000 rpm |
| Spindle ø | 30 |
| More information on the product page | |
New
Surface planer
On request
| Working width | 500 mm |
| Knives | Reversible knife Z4 |
| Engine | 5.5 kW |
| Planer Kölle type AH 50 or short planer for smoothing and levelling (levelling) wood Incl. adjustable angle fence. | |
| More information on the product page | |
New
Forklift truck
On request
| Workpiece height | max. approx. 10 cm |
| Workpiece length | approx. 90-200 cm |
| Universal stacking system Sicko ASF with high-lift truck for use as mechanisation behind planing machines or similar processing machines. | |
| Special price ex location. | |
| More information on the product page | |
New
Dowel drilling machine
On request
| Drill spindles | 2 x 25 |
| Spindle distance | max. 768 mm |
| Division | 32 mm |
| Electro-pneumatic universal dowel hole drilling machine Scheer type DB4 for precise drilling of dowel holes in wood-based materials. The machine enables efficient and precise work thanks to several synchronised horizontal and vertical drilling spindles. Ideal for furniture and interior construction as well as for series production in woodworking. | |
| More information on the product page | |
New
Door lock cutter
On request
| Rotatable | +- 45° |
| Chain width | 17 mm |
| Engine | 2.2 kW |
| Table swivelling | +- 45° |
| More information on the product page | |
New
Surface planer
On request
| Working width | 450 mm |
| Working height | 100 mm (joining) |
| Jointer Kölle type HA 51 or short jointer for smoothing and levelling (planing) of timber incl. Hemag jointing unit. | |
| More information on the product page | |
New
Surface planer
On request
| Working width | 600 mm |
| Knife system | Strip moulding knife Z2 |
| Planer Kölle or planer for short for smoothing and levelling (planing) wood Incl. adjustable angle fence and accessories | |
| More information on the product page | |
New
Table milling machine
On request
| Clamping length | 125 mm |
| Speed ranges | 1400 / 3500 / 6000 / 800 rpm |
| Milling spindle diameter | 30 mm |
| Engine power | 4 kW |
| More information on the product page | |